Cookie Consent Required
This page uses cookies to remember your access and provide a better experience. By continuing, you accept the use of the following cookies:
- Access Cookie — Stores your session so you don’t need to re-enter your email each visit. Duration: 30 days.
- Consent Cookie — Records that you have accepted this cookie policy. Duration: 365 days.
For more information, see our Privacy Policy.
Access Product Resources
Enter your email address to access the documentation, software, and support resources for this product.
Your email is only used to provide you with product support.
Welcome to Your Product Resource Hub
Here you’ll find everything you need for your product, including manuals, software downloads, quick setup guides, FAQs, and detailed video tutorials. This page is designed to provide easy access to all essential resources, helping you set up, operate, and get the best possible performance from your product.
If you need further information or still have questions, please don’t hesitate to contact us at support@craltech.com. Our team will be happy to assist you.
Quick Setup & Connection Guide
Connect Video
Connect the HDMI source to the Encoder HDMI IN port (or HDMI display to the Decoder HDMI OUT port).
Connect to Network
Connect the 10G/1G Ethernet port (or SFP+ fiber port) to your network switch. Ensure the switch supports the required bandwidth (10GbE for W10/W10mini, 1GbE for W1).
Power On
Connect the 12V power supply. The unit will start encoding/decoding automatically.
Configure via Wave Platform
Access the Craltech Wave Centralized Management Platform via Ethernet to configure routing, multiview layouts, video wall configurations and KVM assignments.
KVM Setup (W10 and W1 only)
Connect USB keyboard and mouse to the unit USB inputs. Connect KVM USB cable to the computer for remote keyboard and mouse control over IP.
FAQ
Share your experience with this product
Whether you own it, tested it at a demo or saw it at a trade show — we value your impression.
How do you know this product?
Thank you for your feedback!
SPECIFICATIONS
Product Comparison
| Feature | W10 | W10 Mini | W1 |
|---|---|---|---|
| Network | 10GbE SDVoE | 10GbE SDVoE | 1GbE H.265 |
| Compression | Uncompressed | Uncompressed | H.264/H.265 |
| Latency | Zero-frame | Zero-frame | Low |
| Max Resolution | 4096x2160 @ 60Hz | 4096x2160 @ 60Hz | 4K @ 60Hz 4:4:4 |
| KVM | Yes | No | Yes |
| PoE | Yes (802.3at) | No | Yes |
| Encryption | AES 128-bit | AES 128-bit | AES 128-bit |
| Consumption | Enc: 12W / Dec: 8.5W | Enc: 12W / Dec: 8.5W | Enc: 12W / Dec: 8.5W |
Connections
W10
VIDEO INPUTS
- 1 x 4K HDMIVIDEO OUTPUTS
- 1 x 4K HDMIKVM
- 1x USB 2.0 HOST (Type B) — connects to source PC in Encoder mode- 2x USB 2.0 (Type A) — for keyboard and mouse in Decoder mode
HARDWARE
- 1 x 10G BASE-T (RJ-45)- 1 x 10G SFP+ fiber slot (SFP+ module not included)
- CAT6A/7 up to 100 m; fiber reach depends on the SFP+ module used
W10 Mini
VIDEO INPUTS
- 1 x 4K HDMIVIDEO OUTPUTS
- 1 x 4K HDMIHARDWARE
- 1 x 10Gb/s Lan with RJ-45- 1 x SFP+ 10Gb/s (SFP+ module not included)
- Up to 300 m over multimode fiber, up to 40 km over single mode fiber (depending on the 10G optical module used)
W1
VIDEO INPUTS
- 1 x 4K HDMIVIDEO OUTPUTS
- 1 x 4K HDMIAUDIO INPUTS AND OUTPUTS
- 2x AUDIO IN- 2x AUDIO OUT
KVM
- 1x USB Host (Type B) — connects to source PC in Encoder mode- 2x USB Device (Type A) — for keyboard and mouse in Decoder mode
HARDWARE
- 1x 1Gb/s LAN (RJ45, with PoE support)- 1x RS-232 (3-pin phoenix connector)
- 1x SFP (Fiber slot)
Power requirements
Power supply
Input: AC 100 - 240V 50/60Hz, Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL certified)Power Fail protection
Settings are retained across power cycles.Power Consumption
Approx. 13.5 WEnvironmental Specifications
Operating Temperature
32°F – 104°F / 0°C – 40°CStorage Temperature
-4°F – 140°F / -20°C – 60°COperating Humidity
20% – 80% relative humidity, non-condensingStorage Humidity
10% – 90% relative humidity, non-condensingWarranty
2 year warranty on the electronics. Limited Manufacturer warranty.Compliance & Certifications
CE — EMC Directive 2014/30/EU
Tested to: EN 55032:2015+A1:2020+A11:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A2:2024, EN 61000-3-3:2013+A1:2019+A2:2021FCC Part 15
This device may not cause harmful interference, and this device must accept any interference received.This product is professional audiovisual equipment, certified for professional AV use. Applications requiring sector-specific or safety-critical certification beyond those listed should be verified by the integrator for the intended installation environment.