KiO Portable 12G-SDI Video Workstation
Launching at ISE 2027 · Barcelona · 2–5 February · Stand 5K190

Five boxes in your bag. One KiO.

KiO is a portable 12G-SDI video workstation that converts, monitors, measures, switches and drives video walls. One aluminium box, engineered in Barcelona, ready the moment you power it on.

No laptop needed. Screen, encoder and keys built in. App and PC control when you want them.

Your bag is about to get a lot lighter.

Every job, the same ritual: a converter, a multiviewer, a distribution amplifier, an embedder, a small monitor, cables, power supplies. Five boxes from five brands, five menus to learn, five things that can fail. KiO puts them in one box you control with one encoder.

A single KiO in the bag that used to carry five boxes, on location
In your bag todayIn KiO
12G-SDI / HDMI cross converterIncluded
MultiviewerIncluded
1×4 distribution amplifierIncluded
Audio embedder / de-embedderIncluded
Field monitor with scopes and LUTsAdd Scope and Monitor
Video wall controllerAdd Wall
Portable switcherAdd Mix
KiO Cross

Everything you need, from the first minute.

Every KiO starts as KiO Cross: the signal toolkit you reach for on every job.

  • Five 12G-SDI BNCs, each one configurable as input or output.
  • Cross-conversion between 12G-SDI and 4K HDMI, with native and scaled outputs at the same time.
  • 1×4 distribution from a single input.
  • Multiview on the built-in screen or on any output: full screen, quad, picture-in-picture, or one large and three small.
  • Audio embedding and de-embedding, with lip-sync delay.
  • Audio level meters for 16 channels on SDI and 8 on HDMI.
  • Signal information at a glance: resolution, frame rate, colour space and SDR or HDR (HLG/PQ), read from the signal itself.
  • Genlock to lock to the house reference.
  • CrossCut, the switcher built in: set an output to switcher mode, pick any input directly and cut cleanly.
  • SFP slot for fibre or SMPTE ST 2110 in HD.
  • 8K over quad-link.
  • Test patterns, including SMPTE RP 219.

Fully standalone. A 3.5″ screen, a rotary encoder and five keys. No laptop needed, no menus buried three levels deep. And when you want to control it from somewhere else, use the mobile app or the PC software, also with Stream Deck. Same logic everywhere.

Add what your job needs. When it needs it.

KiO grows with you. Each tool turns the same hardware into a new instrument, powered by the FPGA engine inside. Try any tool free with a watermark, then keep it for good.

Scope

The instrument you take to every job

High-grade video and audio measurement in your hand. Waveform (luma, YCbCr, parade, RGB), vectorscope with Rec.709 and BT.2020 targets and skin-tone line, histogram, SDR and HDR graticules in nits, gamut alarms, false colour, freeze, black and silence detection, CRC error counting, timecode and detailed payload ID analysis, and EBU R128 loudness with true peak.

It doesn’t replace the scope in your lab. It’s the one you take everywhere else.

Monitor

See what the camera really sees

3D LUTs for camera log and HDR-to-SDR viewing, including your own .cube files. Full-resolution peaking, false colour, zebra, 1:1 zoom, frame markers including 9:16, and de-squeeze.

Wall

A video wall in your hand

One 12G-SDI or HDMI input across four outputs. Rotate the image freely in real time with the encoder, compensate bezels, crop each output and recall presets. Ideal for creative LED and LCD layouts.

Mix

A 4K production switcher in a box

Preview/program switching with a wide set of transitions, live graphics from a laptop over HDMI, logo insertion with transparency, region of interest to get close-ups from a single 4K camera, fade to black, and an events mode for laptop inputs, custom LED resolutions and still images.

Licences are permanent and stay with the unit when you sell it.

One box. Four ways to start.

Same hardware in every model. Start with what you need and upgrade any time; you only pay the difference.

ModelIncludesMade for
KiO Cross The base toolkit Conversion, distribution and multiview on every job
KiO Live Cross + Mix + Wall Events, LED, corporate, houses of worship
KiO Camera Cross + Monitor + Scope Camera, DIT, rental and broadcast QC
KiO All-in-One Everything Rental houses and engineers who want it all

Prices shown at ISE 2027. Join the waitlist for launch pricing.

Built by the people who answer your call.

For 30 years, our family of engineers in Barcelona has designed the monitors and processors that run broadcast galleries, OB vans and control rooms that never sleep. KiO is built the same way: our own FPGA processing for ultra-low latency, a chassis precision-milled from black-anodised aluminium for heat, shielding and the knocks of field work, and software that keeps improving through regular updates.

Own FPGA engine

Real-time processing of 12G-SDI and 4K HDMI, with new functions delivered by software.

Built to last

Aluminium chassis, VESA 75 mounting with steel inserts, ready for rack, desk or camera rig.

Close support

When you call, you talk to the people who designed it.

Making KiO

The road to launch, as it happens.

KiO is being designed and built at our engineering office in Barcelona: hardware, software and everything in between. Here we share the process, step by step, with real photos from our bench. No renders.

The first KiO circuit boards on the bench in Barcelona, still sealed with their humidity indicator September 2026

First prototypes

The first KiO boards arrive at our bench in Barcelona, still sealed with their humidity indicator. Hardware and software, both designed in-house.

A 3D-printed KiO chassis held in hand, with the HDMI, Ethernet and USB cut-outs October 2026

3D-printed chassis

Before machining the aluminium, we print the chassis in 3D to check that every board, connector and screw fits where it should. A mistake is much easier to fix here than in metal.

The KiO main menu on the prototype hardware, showing the Cross, Scope, Monitor, Wall and Switcher tools October 2026

The tools

The main menu running on the real hardware for the first time. One screen, five tools: Cross, Scope, Monitor, Wall and Switcher.

The KiO emulator on screen at the Craltech engineering office in Barcelona November 2026

The emulator

Our software team designs every KiO screen on this emulator: the front panel, the mobile app and the PC software, all together. If you know one, you know the others.

The KiO mobile app running the Wall tool on a phone, with the video wall output on the screen behind November 2026

The mobile app

The Wall tool, now also from the phone. Drag a screen in the app and it moves on the output. Same tools and same logic as on KiO’s own screen.

The KiO board showing the scopes on its own 3.5-inch screen, next to the same scopes and signal information on the output monitor November 2026

Running on the hardware

The switcher, the signal info and the scopes, working on the real board for the first time. Here, the scopes on KiO’s own screen and on the output at the same time.

Follow the process on LinkedIn →

Specifications

KiO rear and front: five 12G-SDI BNCs, SFP, genlock, remote, HDMI in and out, 3.5-inch screen and five function keys
SDI5 × 12G-SDI BNC, each configurable as input or output
HDMI1 × HDMI 4K input, 1 × HDMI 4K output
SFP1 × SFP slot: fibre, SMPTE ST 2110 (HD) or additional SDI
ReferenceGenlock input
AudioAnalogue stereo in/out, 3.5 mm jack
Control3.5″ TFT screen, rotary encoder, 5 function keys. Mobile app. PC control software over Ethernet, compatible with Stream Deck. USB.
FormatsUp to 2160p60; 8K via quad-link
HDCPNot supported, because KiO has SDI outputs
MountingVESA 75
ChassisBlack-anodised aluminium
Dimensions and weightTBD

KiO keeps getting better.

We release updates about every three months. The KiO you buy at launch will do more next year.

KiO is in continuous development. New tools, new functions and refinements arrive with each update, and we announce them as they are ready. Much of what comes next will be shaped by what you ask us for. Stay tuned.

Frequently asked questions

When can I buy KiO?

KiO launches at ISE 2027 in Barcelona (2–5 February). Waitlist members get priority.

Do I pay a subscription for the tools?

No. Tools are one-off purchases and the licence is yours for good.

Can I upgrade later?

Yes. Add any tool online, or move up to a bigger model and pay only the difference.

Can I try a tool before buying it?

Yes. Every tool runs in trial mode with a watermark.

What happens if I sell my KiO?

The tools stay with the unit, so the buyer keeps them.

Do I need a laptop or internet connection?

No. KiO works fully standalone with its own screen and controls.

Can I control KiO remotely?

Yes. Besides its own screen and keys, you can control KiO from the mobile app or from the PC software over Ethernet, which also works with Stream Deck. All of them follow the same logic, so if you know one, you know the others.

Does KiO support HDCP?

No. KiO has SDI outputs, so HDCP-protected HDMI sources are not supported. The screen shows a clear notice when this happens.

Where can I buy it?

Directly from Craltech or from your local dealer. Find a dealer.

Be first in line.

Join the waitlist for launch pricing, priority delivery from the first batch and an invitation to try KiO at ISE.

You’re on the list. We’ll be in touch before ISE with launch pricing and a slot to try KiO.

We’ll keep you posted. See you at ISE.